Universal Parts Tire Valve Stem Insertion Tool

Universal Parts Tire Valve Stem Insertion and Removal Tool.

Insertion Instructions:

1. Before insertion, lubricate valve above base.
2. Insert valve through rim hole and then screw the threaded end of tool onto the threaded end of the valve until the tool is snug.
3. Using the edge of the rim as the leverage point, engage a groove on the tool handle in order to provide the best leverage.
4. Depress handle with a smooth steady pressure until the base of the valve is seated flush and snug against the inner side of the rim.

Removal Instructions:

1. Bend valve to expose edge of rim hole in order to lubricate the edge of rim touching the valve stem.
2. Screw the the threaded end of the tool onto the threaded end of the valve until the tool is snug.
3. Depress handle until valve is pulled through hole.

• Overall Length: 12.5 Inches
• Handle Length: 11.5 Inches
• Made in Taiwan